Fiduciary News

Cleaning The Hose Of Shark Vacuum Nv360: Easier Than You Thought

Shark is one of the biggest brands in the world in producing vacuum cleaners. Lots of Shark vacuums are very popular to consumers because of their high quality, consistency and modern technology applied such as Never Lose Suction or Anti allergen complete seal technology. However, any machine needs maintenance and there are some maintenance tasks that we can do ourselves at home without the help of mechanics. In this post, we would like to describe how to clean the hose of Shark NV360 as well as similar models.

PREPARATION

To make the hose of Shark nv360 vacuum perfectly clean, water and soap are not enough. Below are several things needed for this process.

Cleaning substances: soap, baking soda and white acetum.

Utensils: a screwdriver, a cloth, a scrubber and a washing bowl.

PROCESS

• • Remove the nozzle

Certainly, this part cannot be cleaned while it is still attached to the machine, but remember to unplug the power cord before detaching it.

To remove the hose, first, press the tabs on both sides to get rid of the connection between it and the entire machine. After that, push the releasing button on the extension nozzle to detach the handle, you now have the handle and the hose away from the device. Next, remove all the screws with the screwdriver, then extract the higher plastic part and completely take the nozzle of the blue Shark vacuum out.

• • Clear clogs

Before washing the nozzle with water, it is recommended to briefly clean some kinds of substances that may be stuck inside such as pet hair or blocks of dirt. This will make the hose easy to clean afterward. Use a thin stick or a small tree branch to sweep promptly so that you can get rid of a considerable amount of debris. Remember to do it gently as the nozzle of Shark navigator NV360 is not as hard as water pipes.

• • Wash the nozzle

Pour warm water to fill a third to a half of the washing bowl, then add a little soap or mild detergent. Sink the nozzle into the bowl and use the scrubber to rub promptly the outside surface to get rid of all the dirt.

Next, make a mixture of acetum and baking soda, then pour it inside the hose, use your hands to seal both heads of the nozzle and shake firmly to wash all the dirt inside.

Release one hand to let the mixture go out, use water to wash all the substances that may be left inside. Now the hose of Shark navigator deluxe nv360 is nearly clean.

• • Dry the hose

Use the cloth to wipe the hose then put it in a cool and dry place for 24 to 48 hours to make sure there is no more water on it. Remember to avoid the sunshine and do not use a hairdryer or fire for this task as you can melt or break the hose in this way.

• • Reassemble the hose

Do the same actions in reverse to put the hose to its original place. Make sure it is completely dry before reassembling, otherwise, this may cause problems with the engine or even break it. Now the nozzle of Shark navigator 360 is ready for floor cleaning. Always pay attention to the suction power to realize when the hose needs cleaning, this will prolong the consistency of your vacuum cleaner.

CONCLUSION

Cleaning the hose of Shark navigator lift away deluxe nv360 is what you can do at home with several simple things. Follow the above instructions and you will reduce a considerable amount for Shark NV360 Reviews .